Speed Monitoring via IRD7100
Can IRD7100 do Speed Monitoring using Laser Tachometer as Input Sensor?
Yes, IRD7100 can do Speed Monitoring using Laser Tachometer as Input Sensor. Please specify at time of ordering. The Target surface will need reflective paint or reflective tape patch to help the Laser sense rotation and pass on info to IRD7100 for ...
Input Sensor supported by IRD7100 MPT Wall Mount Speed Monitoring System?
IRD7100 MPT Wall Mount Speed Monitoring System is a 2 Channel Speed Monitoring Transmitter. It supports Non-Contact Eddy Current Based Sensor as it's Input. The Sensitivity of the Sensor should be 7.87 mV/um +/- 10%. The Sensor should be facing a ...
Input Power required by IRD7100 MPT Wall Mount Speed Transmitter?
Unless specified otherwise, IRD7100 MPT Wall Mount Speed Transmitter requires 230 V AC, 50/60 Hz, Single Phase Grounded Power Supply as Input Power. Floating Power Supply (Potential difference between Neutral and Earth of 110 V AC) is not acceptable. ...
What is the Maximum Speed Measurement possible using IRD7100 Speed Transmitter?
IRD7100 Speed Transmitter is a Wall Mounted Transmitter. It measures speed using a Tooth wheel or notch on rotating shaft. It counts number of pulses in a second using Non-Contact type Eddy Current based Proximity Sensor. IRD7100 Speed Transmitter ...
IRD7100 Speed Monitoring Options
IRD7100 has the following Speed Monitoring Options. Units are Pulses/Second. Pulses are multiplication of Machine RPM and No. of Tooth 8 Pulses/Second 16 Pulses/Second 20 Pulses/Second 63.25 Pulses/Second 200 Pulses/Second 632.5 Pulses/Second 2000 ...