What is the Maximum Speed Measurement possible using IRD7100 Speed Transmitter?
IRD7100 Speed Transmitter is a Wall Mounted Transmitter. It measures speed using a Tooth wheel or notch on rotating shaft. It counts number of pulses in a second using Non-Contact type Eddy Current based Proximity Sensor. IRD7100 Speed Transmitter provides 4-20 mA output, Alarm and Trip Relay contacts and 0-5 V DC Output per channel. Factory default - IRD7100 Speed Transmitter is set for Full Scale range of 0-4000 RPM for 1 Notch.
The maximum speed that IRD7100 Speed Transmitter can measure within an accuracy of +/- 1% of Full Scale is 9,60,000 RPM
Related Articles
User Manual of IRD6600 (Entek IRD 6600)
IRD6600 is a now Obsolete system that has been replaced by IRD8800. User manual of IRD6600 is attached to this Article.User Manual of IRD7100 MPT - Machinery Protection Transmitter
Introduction Introduction to IRD Mechanalysis Limited IRD Mechanalysis Limited also commonly referred as 'IRD' is a Condition Monitoring Solutions provider to the World since 1962. IRD designs, manufactures and supplies Portable Instruments and ...User Manual of IRD7200 MST (Machinery Signal Transmitter)
Introduction About IRD Mechanalysis Limited IRD Mechanalysis Limited also commonly referred as IRD is a Condition Monitoring Solutions provider to the World since 1962. IRD designs, manufactures and supplies Portable Instruments and Online Systems ...Input Power required by IRD7100 MPT Wall Mount Speed Transmitter?
Unless specified otherwise, IRD7100 MPT Wall Mount Speed Transmitter requires 230 V AC, 50/60 Hz, Single Phase Grounded Power Supply as Input Power. Floating Power Supply (Potential difference between Neutral and Earth of 110 V AC) is not acceptable. ...IRD7100 Speed Monitoring Options
IRD7100 has the following Speed Monitoring Options. Units are Pulses/Second. Pulses are multiplication of Machine RPM and No. of Tooth 8 Pulses/Second 16 Pulses/Second 20 Pulses/Second 63.25 Pulses/Second 200 Pulses/Second 632.5 Pulses/Second 2000 ...