Can IRD7100 do Speed Monitoring using Laser Tachometer as Input Sensor?
Yes, IRD7100 can do Speed Monitoring using Laser Tachometer as Input Sensor. Please specify at time of ordering. The Target surface will need reflective paint or reflective tape patch to help the Laser sense rotation and pass on info to IRD7100 for computation of Speed.
Related Articles
Input Sensor supported by IRD7100 MPT Wall Mount Speed Monitoring System?
IRD7100 MPT Wall Mount Speed Monitoring System is a 2 Channel Speed Monitoring Transmitter. It supports Non-Contact Eddy Current Based Sensor as it's Input. The Sensitivity of the Sensor should be 7.87 mV/um +/- 10%. The Sensor should be facing a ...
User Manual of IRD6600 (Entek IRD 6600)
IRD6600 is a now Obsolete system that has been replaced by IRD8800. User manual of IRD6600 is attached to this Article.
User Manual for Gap Monitoring via IRD7100
Introduction This article serves as the User Manual for IRD7100 when used for Gap Monitoring Introduction to IRD Mechanalysis Limited IRD Mechanalysis Limited is a provider of Condition Monitoring Solutions to the World since 1962. Also commonly ...
User Manual for Vibration Monitoring via IRD8800
1. Introduction This Article serves as the User Manual for Vibration Monitoring via IRD8800 1.1 Introduction to IRD Mechanalysis Limited IRD Mechanalysis Limited is a provider of Condition Monitoring Solutions to the World since 1962. Also commonly ...
What is the Maximum Speed Measurement possible using IRD7100 Speed Transmitter?
IRD7100 Speed Transmitter is a Wall Mounted Transmitter. It measures speed using a Tooth wheel or notch on rotating shaft. It counts number of pulses in a second using Non-Contact type Eddy Current based Proximity Sensor. IRD7100 Speed Transmitter ...