IRD7100 Speed Monitoring Options
IRD7100 has the following Speed Monitoring Options. Units are Pulses/Second. Pulses are multiplication of Machine RPM and No. of Tooth
- 8 Pulses/Second
- 16 Pulses/Second
- 20 Pulses/Second
- 63.25 Pulses/Second
- 200 Pulses/Second
- 632.5 Pulses/Second
- 2000 Pulses/Second
- 6325 Pulses/Second
- 16000 Pulses/Second
Based on actual pulses/second, the higher available option shall be chosen from above. So, minimum 8 pulses/second and maximum 16,000 pulses/second
Related Articles
User Manual of Generator End Winding Vibration Monitoring System Card M88280 of IRD8800 Series
Attached to this Article is the User Manual of Generator End Winding Vibration Monitoring System (GEWVMS) Card M88280 of IRD8800 SeriesIRD8800 MODBUS Output Register Map
Attached you will find the MODBUS RTU/MODBUS TCP/IP Register Map for Cards of the Vibration Monitoring System IRD8800. This register map applied to all cards i.e M88200, M88210, M88250 and M88280Which Type Tests has IRD8800 passed?
IRD8800 is our flagship Vibration Monitoring System and is API 670 Compliant. The series has been type tested for the following tests in which it has passed and the results are current: Dry Heat Cyclic, IS:9000 P-III Damp Heat Cyclic, IS: 9000 P-V ...Sensitivity options in IRD8800 Module M88210
The Relative Shaft Vibration Module M88210 of IRD8800 Series allows different Sensitivity options to accommodate different Eddy Current Probes of different manufacturers keeping different Sensitivities. The option to minutely adjust sensitivity also ...Tx Fail Relay Contacts in IRD8800 Series Monitoring System
IRD8800 Series Monitoring System is designed to provide Tx Fail Relay Contacts per Module in the event of Transducer Failure (Sensor going bad or fault in cable). These contacts can be used for Annunciation. The TX Fail Relay operates when any ...