IRD7100 MPT Wall Mount Speed Monitoring System is a 2 Channel Speed Monitoring Transmitter. It supports Non-Contact Eddy Current Based Sensor as it's Input. The Sensitivity of the Sensor should be 7.87 mV/um +/- 10%. The Sensor should be facing a ...
Unless specified otherwise, IRD7100 MPT Wall Mount Speed Transmitter requires 230 V AC, 50/60 Hz, Single Phase Grounded Power Supply as Input Power. Floating Power Supply (Potential difference between Neutral and Earth of 110 V AC) is not acceptable. ...
IRD7100 Speed Transmitter is a Wall Mounted Transmitter. It measures speed using a Tooth wheel or notch on rotating shaft. It counts number of pulses in a second using Non-Contact type Eddy Current based Proximity Sensor. IRD7100 Speed Transmitter ...
An Accelerometer is a Sensor which has the ability to sense vibration acceleration. The SI unit of Acceleration is m/s^2. The Acceleration due to gravity is denoted as 'g'. The Acceleration due to gravity i.e 1 g is 9.81 m/s^2. Vibration Amplitude in ...
Introduction to Spike Energy IRD Mechanalysis have developed “Spike Energy” to detect rolling element bearing condition in its very early stage. “Spike Energy” detects low amplitude transient impacts generated within the ultrasonic frequency range by ...
We live in a 3 Dimensional world. Objects are free to move along X, Y and Z coordinates. For any movement happening in X direction - Y and Z become the Transverse directions. Similarly, for any movement happening in Y direction - X and Z become the ...
The purpose of the Key Phasor module in a Vibration Monitoring System is to act as the reference point for phase on a machine train. Using this reference point, the vibration phase of other sensors on the machine train can be deduced. Usually the ...
1 Radian Vibration is a Periodic Motion. The time taken to complete one cycle of vibration is called as the Time Period of Vibration (T). This is measured in Seconds (s) The number of cycles of vibration completed in one second is called as the ...