M88280 Sensitivity

Sensitivity of M88280

M88280 Module of IRD8800 Series is meant for Vibration Monitoring of Generator End Winding. The sensitivity of the module can be adjusted based on the input high temperature sensor and Charge Amplifier. The Sensitivity for a Charge Amplifier with an output proportional to Vibration Acceleration can be between 0.1 mV/g and 999.9 mV/g. However, the most popular sensitivity in use are 150 mV/g and 250 mV/g

    • Related Articles

    • User Manual of IRD6600 (Entek IRD 6600)

      IRD6600 is a now Obsolete system that has been replaced by IRD8800. User manual of IRD6600 is attached to this Article.

    • What is Sensitivity of an Accelerometer

      An Accelerometer is a Sensor which has the ability to sense vibration acceleration. The SI unit of Acceleration is m/s^2. The Acceleration due to gravity is denoted as 'g'. The Acceleration due to gravity i.e 1 g is 9.81 m/s^2. Vibration Amplitude in ...

    • Sensitivity options in IRD8800 Module M88210

      The Relative Shaft Vibration Module M88210 of IRD8800 Series allows different Sensitivity options to accommodate different Eddy Current Probes of different manufacturers keeping different Sensitivities. The option to minutely adjust sensitivity also ...

    • Sensitivity Setting in IRD8800 module M88200

      Module M88200 of IRD8800 series allows Sensitivity setting in mV/g and mV/mm/sec. M88200 can accept Sensors with Sensitivity 10 mV/g, 50 mV/g, 100 mV/g, 200 mV/g and 500 mV/g (all commonly used sensitivities in the market) The Full Scale possible ...

    • Sensitivity Options in IRD8800 Module M88250

      IRD8800 Series is an API 670 Compliant Machinery Protection System (MPS). It's module M88250 is used for Casing Vibration Monitoring and Protection paired with IRD544M Sensor. IRD544M sensors are designed for Nominal Sensitivity 42.52 mV/mm/sec +/- ...