GE300 - Uni-Directional Shaker for Verification of Calibration of both Contact Type as well as Non-Contact type Vibration Sensors, Meters, Transmitters and Monitoring Systems. Calibration in accordance to ISO16063-21 Standard. Able to generate ...
IRD CAL Portable Calibrator is an easy to use device that can be used to quickly check Calibration of Vibration Meters on-site. It has Three Switch Positions - OFF, mV/g and mV/mm/s. It has a 2 Pin MS Male Connector and an Indication Lamp for Power ...
An Accelerometer is a Sensor which has the ability to sense vibration acceleration. The SI unit of Acceleration is m/s^2. The Acceleration due to gravity is denoted as 'g'. The Acceleration due to gravity i.e 1 g is 9.81 m/s^2. Vibration Amplitude in ...
Introduction to Spike Energy IRD Mechanalysis have developed “Spike Energy” to detect rolling element bearing condition in its very early stage. “Spike Energy” detects low amplitude transient impacts generated within the ultrasonic frequency range by ...
We live in a 3 Dimensional world. Objects are free to move along X, Y and Z coordinates. For any movement happening in X direction - Y and Z become the Transverse directions. Similarly, for any movement happening in Y direction - X and Z become the ...
The purpose of the Key Phasor module in a Vibration Monitoring System is to act as the reference point for phase on a machine train. Using this reference point, the vibration phase of other sensors on the machine train can be deduced. Usually the ...
1 Radian Vibration is a Periodic Motion. The time taken to complete one cycle of vibration is called as the Time Period of Vibration (T). This is measured in Seconds (s) The number of cycles of vibration completed in one second is called as the ...