What are the features of GE300 - Unidirectional Vibration Shake Table
GE300 - Uni-Directional Shaker for Verification of Calibration of both Contact Type as well as Non-Contact type Vibration Sensors, Meters, Transmitters and Monitoring Systems. Calibration in accordance to ISO16063-21 Standard.
Able to generate Vibration of varying amplitudes between 0.1 g pk and 4.4 g pk at a frequency of 50 Hz or 60 Hz - depending on Line Frequency. Made in India and comes with standard 12 months warranty.
- Can be kept on Ground or Table. Needs a levelled flat surface
- Sturdy Design - suitable for Rough use
- Amplitude can be controlled between 0 and maximum via sweep of Rotary Knob
- Power ON/OFF Button
- Studs can be provided as many as required to assist in mounting of Contact Type Vibration Sensors. By default, comes with provision for 5 Contact Type Sensors (1 reference + 4 Under observation)
- Comes with reference sensor contact type with display and 5 meters cable between Shaker and External Display
- Calibration checking in accordance to ISO16063-21 standard
- For Non-Contact type sensors, magnetic holder for sensors sold separately
- Generates Vibration at a frequency of 50 Hz or 60 Hz - depending on Line Frequency
- Works on 230 V AC, 50/60 Hz, Single Phase Power Input
- Vibrating Table Top is 340 x 340 mm in size with max payload of 5 kg
For a quotation - please contact sales@irdmech.com or call us at +91-2248972000 (Monday to Saturday 9 AM to 6 PM IST). For queries or Service - visit our Help Page or reach out to us on service@irdmech.com
Related Articles
How to correctly read Vibration on IRD811
IRD811 is an Analog Display Vibration Meter. It has two scales for two range multiples. If you are reading in the multiple of 10, then you need to refer to the top 0 to 1.0 scale and grade it according to your full scale range selection. If you are ...About IRD306DI
IRD306DI is a Portable Digital Vibration Meter. It is meant for Vibration Measurement of Large Machinery. It is manufactured by IRD Mechanalysis Limited in Maharashtra in India. It boasts the following features: It works with Sensor IRD544 which is ...How to Check Calibration of IRD306DI with its Sensor
In order to check the Calibration of IRD306DI with its Sensor IRD544, a Portable Vibration Calibrator or a Permanent Vibration Calibrator is needed. The Calibrator should have the facility to generate a pure vibration of a fixed frequency and a fixed ...What is Spike Energy and why is it useful for Bearing Health Monitoring?
Introduction to Spike Energy IRD Mechanalysis have developed “Spike Energy” to detect rolling element bearing condition in its very early stage. “Spike Energy” detects low amplitude transient impacts generated within the ultrasonic frequency range by ...How to Operate IRD306DP
IRD306DP is a Digital Vibration Meter that allows for measurement of General Machinery Vibration. It works with the Velometer IRD531. The following steps list the method of operating an IRD306DP. Step 1: Insert two numbers of 9 V Batteries ...