IRD7100 - Machinery Protection Transmitter
What is the Expected Voltage between Terminals 4 and 5 (4-20 mA output) for each channel for IRD7100 MPT
IRD7100 Series Machinery Protection Transmitters (MPT) are Wall Mountable Transmitters that come in an IP65 rated enclosure. These Transmitters are able to monitor parameters such as Vibration, Temperature, Speed and more and transmit the levels to ...
Maximum Current Consumption of 2 Channel Machinery Protection Transmitter (MPT) IRD7100
IRD7100 Machinery Protection Transmitter (MPT) is a Power Efficient Device. The Maximum Current it consumes in a steady state is summarised in table below. Variety Maximum Current Consumption in mA IRD7100 with Digital Display but no External Lamps ...
Typical Connection Drawing for IRD7100 with MODBUS Output for Casing Vibration
Attached Drawing shows how 2 x Vibration Sensors are connected typically to IRD7100 Machinery Protection Transmitter (MPT) having MODBUS Output
IRD7100 Speed Monitoring Options
IRD7100 has the following Speed Monitoring Options. Units are Pulses/Second. Pulses are multiplication of Machine RPM and No. of Tooth 8 Pulses/Second 16 Pulses/Second 20 Pulses/Second 63.25 Pulses/Second 200 Pulses/Second 632.5 Pulses/Second 2000 ...
How many copies of 4-20 mA output per channel in IRD7100 Machinery Protection Transmitter (MPT)?
By default, IRD7100 MPT is equipped with 1 copy of 4-20 mA output per channel. However, in some cases where Customer requires 1 copy of 4-20 mA for connection to DCS/PLC/SCADA and 1 copy of MODBUS RTU Output from MPT - in such cases we provide 2 ...
Frequency Response of IRD7100 Machinery Protection Transmitter (MPT)
Reading Velocity in IRD7100 using IRD521 - Frequency Response of MPT will be 5 Hz to 1,000 Hz Reading Velocity in IRD7100 using IRD531 - Frequency Response of MPT will be 5 Hz to 10,000 Hz Reading Velocity in IRD7100 using IRD544M - Frequency ...
User Manual of IRD7100 - Machinery Protection Transmitter
The User Manual for IRD7100 - Machinery Protection Transmitter is attached to this Article
How to Adjust 4 mA in IRD7100 reading Vibration in mm/sec RMS when Vibration is Zero (0)
IRD7100 is an Online Monitoring System. It is designed to continuously monitor vibration of a Machine and transmit its vibration to the Control Room. One popular way of transmitting the vibration information is by using 4-20 mA Output. Here, 4 mA ...
How to connect IRD521 with IRD7100
IRD521 is an Accelerometer which gives a voltage output proportional to Vibration Acceleration. This output has a nominal sensitivity of 100 mV/g +/- 10% over the frequency range. This voltage output is converted to user-interprettable vibration ...
How does an Axial Thrust or Axial Gap Transmitter work
Axial Thrust or Axial Gap Transmitters are used to find out the Displacement of a Shaft in the axial direction. This helps operators of the equipment understand whether or not their equipment - be it a pump, fan, turbine, etc. is safe in axial ...