What Vibration Sensor does IRD202 Vibration Meter and Bearing Health Checker use?
IRD202 Vibration Meter and Bearing Health Checker uses Accelerometer IRD521 as its Vibration Sensor. IRD521 provides 100 mV/g to IRD202 which is then used by the meter to measure Acceleration, Velocity and Displacement of Vibration
Related Articles
What batteries does Vibration Meter and Bearing Checker IRD811D use?
IRD811D Vibration Meter and Bearing Checker uses 1 or 2 x 9V Drycell batteries (depending on the year and month of manufacture - models manufactured pre May 2024 use 2 Batteries whereas models manufactured post May 2024 use 1 Battery). These ...What is Spike Energy and why is it useful for Bearing Health Monitoring?
Introduction to Spike Energy IRD Mechanalysis have developed “Spike Energy” to detect rolling element bearing condition in its very early stage. “Spike Energy” detects low amplitude transient impacts generated within the ultrasonic frequency range by ...Which Input Sensor does IRD301 Vibration Meter use?
IRD301 Vibration Meter measures Vibration Velocity in mm/sec RMS. It uses an IEPE type Accelerometer of 100 mV/g Sensitivity as its Input Sensor. IRD521 is a 100 mV/g output sensor that is paired with IRD301 in its kit. The mV/g signal is Integrated ...How to use IRD CAL Portable Calibrator?
IRD CAL Portable Calibrator is an easy to use device that can be used to quickly check Calibration of Vibration Meters on-site. It has Three Switch Positions - OFF, mV/g and mV/mm/s. It has a 2 Pin MS Male Connector and an Indication Lamp for Power ...User Manual of IRD301 Vibration Meter
Introduction to IRD Mechanalysis Limited IRD301 is a Digital Vibration Meter made by IRD Mechanalysis Limited - also commonly known as 'IRD' and 'The Vibration People'. IRD is a provider of Condition Monitoring Solutions for Vibration, Temperature, ...