What is IRD8100 MPT?

What is IRD8100 MPT?

IRD8100 MPT is a Field Mounted Machinery Protection Transmitter. It is 2 Channel and is equipped with the following features:
  1. Rugged IP65 rated Aluminium Die Cast Enclosure 330 x 230 x 180 mm
  2. 2 Channel Simultaneous real-time round-the-clock vibration monitoring
  3. Alphanumeric display of live vibration
  4. Bargraph display of Live Vibration
  5. Isolated 4-20 mA output per channel
  6. Setpoint, Delay, Latching and more configurable Alarm and Trip Relay contacts per channel
  7. Input from 2 x IRD521 100 mV/g. Option to view reading in Acceleration of Velocity and in different scaling of pk and RMS along with American Units (inch/sec)
  8. Power Consumption less than 1A DC on 24 V DC Input. Inbuilt SMPS that converts standard 90-270 V AC, 50/60 Hz, Single Phase input to 24 V DC

    • Related Articles

    • What is IRD7100 MPT V25?

      IRD7100 is our Machinery Protection Transmitter (MPT). In the year 2025, we have upgraded it to support Floating Power Supply Input - an Input where Voltages between Line and Neutral are 230 V AC, Line and Earth are 230 V AC, but between Neutral and ...

    • How to Connect IRD7100 MPT to Cloud?

      IRD7100 MPT (Machinery Protection Transmitter) is a wall mounted Transmitter. It can be ordered for Vibration, Temperature, Speed or Gap Monitoring. It is built to work as a standalone device without any dependency on Cloud. However, if someone ...

    • Frequency Response of IRD7100 Machinery Protection Transmitter (MPT)

      Reading Velocity in IRD7100 using IRD521 - Frequency Response of MPT will be 5 Hz to 1,000 Hz Reading Velocity in IRD7100 using IRD531 - Frequency Response of MPT will be 5 Hz to 10,000 Hz Reading Velocity in IRD7100 using IRD544M - Frequency ...

    • What is the Power Supply needed by IRD8100 MPT

      IRD8100 MPT can work on Grounded or Floating 90-270 V AC, 50/60 Hz, Single Phase Power Supply. It converts the same to 24 V DC before using in circuit.

    • Input Power required by IRD7100 MPT Wall Mount Speed Transmitter?

      Unless specified otherwise, IRD7100 MPT Wall Mount Speed Transmitter requires 230 V AC, 50/60 Hz, Single Phase Grounded Power Supply as Input Power. Floating Power Supply (Potential difference between Neutral and Earth of 110 V AC) is not acceptable. ...