What cable should be used for Buffered Output connections to Data Acquisition Hardware?
When using Buffered Output from systems like IRD8800, IRD7100, IRD7200 and IRD7400 for connection to Data Acquisition Hardware like NI cDAQ or NI cRIO or Gantner Q.Bloxx and Q.Station - we recommend that 2 core shielded cable should be used. Please do not use cable without shielding as it will induce noise into the measurement and the final reading may become 4 to 5 times more than actual reading. To ensure final reading is in tolerance - please use 2 core shielded signal cable for each channel.
Related Articles
What is a Bode Plot in Oliver Advanced Software?
OLIVER stands for On-Line Investigation of Vibration in Equipments and Rotary Machines. It is a software Homegrown by IRD Mechanalysis Limited and its advanced version helps in performing Vibration Measurement and Analysis. As a part of its standard ...
What is OLIVER Basic 2024?
OLIVER stands for On-Line Investigation of Vibration in Equipments and Rotary Machines. This is our Software for Vibration Monitoring, Trending, Analysis and Reporting. It comes in two variants - Basic and Advanced. OLIVER Basic 2024 connects to our ...
Minimum System Requirements for running OLIVER Basic 2024
This article specifies the minimum system requirements for running the Software OLIVER Basic 2024: OS: Windows 10 or better Processor: Intel Core i5 12th Gen or Better OR AMD Ryzen 5 or better Graphic Card: Integrated Graphic Card or better Display ...