What are the Full Scale Range selection options in IRD811D
IRD811D has a dedicated Full Scale Range selection Slide Switch. The full scale range can be set to position 20, 200 or 2000 as per requirements and selected measuring units
Related Articles
User Manual of IRD811D Slide Switch Variant
You can download the User Manual in PDF for the Product IRD811D Slide Switch Variant from the attachment provided in this article
How to use IRD CAL Portable Calibrator?
IRD CAL Portable Calibrator is an easy to use device that can be used to quickly check Calibration of Vibration Meters on-site. It has Three Switch Positions - OFF, mV/g and mV/mm/s. It has a 2 Pin MS Male Connector and an Indication Lamp for Power ...
User Manual of IRD306DP Plus
Introduction IRD306DP Plus is a Digital Vibration Meter that measures Vibration Amplitude in Velocity mm/s RMS and Displacement microns pk-pk. It uses Vibration Sensor IRD531 having nominal sensitivity 4mV/mm/s for sensing. The meter runs on 1 x 9V ...
How to correctly read Vibration on IRD811
IRD811 is an Analog Display Vibration Meter. It has two scales for two range multiples. If you are reading in the multiple of 10, then you need to refer to the top 0 to 1.0 scale and grade it according to your full scale range selection. If you are ...
User Manual of vbseries and SCOUT
User Manual of vbseries (vbBalancer, vbBalancer+, vb5, vb6, vb7 and vb8) SCOUT100 and SCOUT140 is attached.