User Manual for IRD811 Analog Vibration Meter

User Manual for IRD811 Analog Vibration Meter

Technical Features

Interchangeability of Sensor

IRD811 Analog Vibration Meter uses a 100 mV/g IEPE type 2 Pin Accelerometer (like IRD521). IRD811 can therefore be used (Interchangeable) with any 100 mV/g +/- 10% IEPE type 2 Pin Accerelometer of any make (like CTC, Wilcoxon Research, Hansford, Monitran, etc.)

Power Input

IRD811 Analog Vibration Meter is a Portable Handheld Instrument and is Battery Powered. It requires 2 x 9V Drycell batteries to Power On. It has a Battery Test Switch Position that indicates Battery Health

    • Related Articles

    • IRD306 User Manual

      Attached to this Article is the User Manual of IRD306 - Analog Vibration Meter manufactured by IRD Mechanalysis Limited.

    • User Manual of IRD306DP Plus

      Introduction IRD306DP Plus is a Digital Vibration Meter that measures Vibration Amplitude in Velocity mm/s RMS and Displacement microns pk-pk. It uses Vibration Sensor IRD531 having nominal sensitivity 4mV/mm/s for sensing. The meter runs on 1 x 9V ...

    • User Manual of IRD811D Slide Switch Variant

      You can download the User Manual in PDF for the Product IRD811D Slide Switch Variant from the attachment provided in this article

    • User Manual of vbseries and SCOUT

      User Manual of vbseries (vbBalancer, vbBalancer+, vb5, vb6, vb7 and vb8) SCOUT100 and SCOUT140 is attached.

    • User Manual of IRD202 Vibration Meter and Bearing Health Checker

      Introduction This article serves as the User Manual for IRD202 which is a Vibration Meter and Bearing Health Checker Introduction to IRD Mechanalysis Limited IRD Mechanalysis Limited is a provider of Condition Monitoring Solutions to the World since ...