Typical Connection Drawing for IRD7100 with MODBUS Output for Casing Vibration
Attached Drawing shows how 2 x Vibration Sensors are connected typically to IRD7100 Machinery Protection Transmitter (MPT) having MODBUS Output
Related Articles
IRD8800 MODBUS Output Register Map
Attached you will find the MODBUS RTU/MODBUS TCP/IP Register Map for Cards of the Vibration Monitoring System IRD8800. This register map applied to all cards i.e M88200, M88210, M88250 and M88280
How to connect a Loop Powered Vibration Sensor
Loop Powered Sensors run on a DC Voltage Supply. They are a 2 wired system on which both supply is given and output is observed. Typically, loop powered sensors such as IRD591 are loop powered by DCS/PLC/SCADA by a 24 V DC supply. The sensor then ...
Accuracy of Vibration Sensors
Vibration Sensors have an output proportional to underlying vibration. This output is reported in terms of its sensitivity. When someone uses an accelerometer that has an output or sensitivity of 100 mV/g, this means that the sensor is providing a ...
User Manual of IRD6600 (Entek IRD 6600)
IRD6600 is a now Obsolete system that has been replaced by IRD8800. User manual of IRD6600 is attached to this Article.
What is a Casing Vibration Accelerometer?
Casing Vibration is the measurement of Vibration of the bearing casing or general casing of a rotary machine such as Motor, Pump, Fan, Compressor or Turbine. A Casing Vibration Accelerometer is a type of Vibration Sensor that provides a Voltage ...