Repair and Calibration of IRD308 Vibration and Sound Level Meter

Repair and Calibration of IRD308 Vibration and Sound Level Meter

IRD308 is Obsolete as on 12 July 2025. However, our Service Center at Thane, Maharashtra, India is able to perform Repairs and/or Calibration on IRD308 Vibration cum Sound Level Meter. If you require this Service - please email us on service@irdmech.com 
    • Related Articles

    • Repair and Calibration of IRD306 Analog Vibration Meter

      IRD306 Analog Vibration Meter measures Vibration Amplitude in Velocity mm/s pk and Displacement microns pk-pk. If your IRD306 Analog Vibration Meter needs Repair and/or Calibration - then you can reach out to us on phone at +91-2248972000 (Monday to ...
    • User Manual of IRD301 Vibration Meter

      Introduction to IRD Mechanalysis Limited IRD301 is a Digital Vibration Meter made by IRD Mechanalysis Limited - also commonly known as 'IRD' and 'The Vibration People'. IRD is a provider of Condition Monitoring Solutions for Vibration, Temperature, ...
    • How to Check Calibration of IRD306DI with its Sensor

      In order to check the Calibration of IRD306DI with its Sensor IRD544, a Portable Vibration Calibrator or a Permanent Vibration Calibrator is needed. The Calibrator should have the facility to generate a pure vibration of a fixed frequency and a fixed ...
    • How to correctly read Vibration on IRD811

      IRD811 is an Analog Display Vibration Meter. It has two scales for two range multiples. If you are reading in the multiple of 10, then you need to refer to the top 0 to 1.0 scale and grade it according to your full scale range selection. If you are ...
    • What is Spike Energy and why is it useful for Bearing Health Monitoring?

      Introduction to Spike Energy IRD Mechanalysis have developed “Spike Energy” to detect rolling element bearing condition in its very early stage. “Spike Energy” detects low amplitude transient impacts generated within the ultrasonic frequency range by ...