IRD8800 Module M88300 Menu Structure

• Related Articles

• Sensitivity options in IRD8800 Module M88210

  The Relative Shaft Vibration Module M88210 of IRD8800 Series allows different Sensitivity options to accommodate different Eddy Current Probes of different manufacturers keeping different Sensitivities. The option to minutely adjust sensitivity also ...

• Sensitivity Setting in IRD8800 module M88200

  Module M88200 of IRD8800 series allows Sensitivity setting in mV/g and mV/mm/sec. When Sensitivity Unit is set to mV/g, then the card allows setting a sensitivity value between 000.0 and 999.9 mV/g. Typically, the factory set value is kept at 100.0 ...

• Calibration Check Table for IRD8800 Series Module M88210

  Pre-requisites If you wish to check the Calibration of IRD8800 Series Module M88210, then you would need the following tools: A Signal Generator with the capability to generate a Sine Wave of a fixed frequency and fixed amplitude and an accuracy of ...

• Calibration Check Table for IRD8800 Series Module M88200

  Pre-requisites If you wish to check the Calibration of IRD8800 Series Module M88200, then you would need the following tools: A Signal Generator with the capability to generate a Sine Wave of a fixed frequency and fixed amplitude and an accuracy of ...

• What is the purpose of key phasor module in vibration monitoring system? Can it be used to extract balancing data?

  The purpose of the Key Phasor module in a Vibration Monitoring System is to act as the reference point for phase on a machine train. Using this reference point, the vibration phase of other sensors on the machine train can be deduced. Usually the ...