How to Power On and Turn Off IRD301 Vibration Meter?
IRD301 is a simple Vibration Meter. It has just one button on the front face. Pressing and releasing that button once Powers On the instrument and pressing and releasing the same button once agains Turns off the instrument.
Related Articles
IRD811 - Instrument does not turn ON
In rare cases, if your IRD811 Vibration Meter does not turn ON, it could be because of the following reasons: Wear and Tear of your Battery Snappers causing loss of contact Installed Batteries having insufficient voltage or loss of energy capacity of ...How to correctly read Vibration on IRD811
IRD811 is an Analog Display Vibration Meter. It has two scales for two range multiples. If you are reading in the multiple of 10, then you need to refer to the top 0 to 1.0 scale and grade it according to your full scale range selection. If you are ...How to use IRD CAL Portable Calibrator?
IRD CAL Portable Calibrator is an easy to use device that can be used to quickly check Calibration of Vibration Meters on-site. It has Three Switch Positions - OFF, mV/g and mV/mm/s. It has a 2 Pin MS Male Connector and an Indication Lamp for Power ...How to Operate IRD306DP
IRD306DP is a Digital Vibration Meter that allows for measurement of General Machinery Vibration. It works with the Velometer IRD531. The following steps list the method of operating an IRD306DP. Step 1: Insert two numbers of 9 V Batteries ...About IRD306DI
IRD306DI is a Portable Digital Vibration Meter. It is meant for Vibration Measurement of Large Machinery. It is manufactured by IRD Mechanalysis Limited in Maharashtra in India. It boasts the following features: It works with Sensor IRD544 which is ...