Frequency Response of IRD7200 MST for Vibration Monitoring
IRD7200 MST is a Din Rail Mountable Transmitter that can be used for Vibration Monitoring. When being used with an Accelerometer (100 mV/g) - the frequency response of IRD7200 MST is 5 Hz to 1,000 Hz +/- 10%. In this Frequency window - IRD7200 MST will give an accuracy of +/- 1% of Full Scale.
Related Articles
Accuracy of Vibration Sensors
Vibration Sensors have an output proportional to underlying vibration. This output is reported in terms of its sensitivity. When someone uses an accelerometer that has an output or sensitivity of 100 mV/g, this means that the sensor is providing a ...
User Manual of IRD6600 (Entek IRD 6600)
IRD6600 is a now Obsolete system that has been replaced by IRD8800. User manual of IRD6600 is attached to this Article.
User Manual of Generator End Winding Vibration Monitoring System Card M88280 of IRD8800 Series
Attached to this Article is the User Manual of Generator End Winding Vibration Monitoring System (GEWVMS) Card M88280 of IRD8800 Series
Which Type Tests has IRD8800 passed?
IRD8800 is our flagship Vibration Monitoring System and is API 670 Compliant. The series has been type tested for the following tests in which it has passed and the results are current: Dry Heat Cyclic, IS:9000 P-III Damp Heat Cyclic, IS: 9000 P-V ...
IRD8800 MODBUS Output Register Map
Attached you will find the MODBUS RTU/MODBUS TCP/IP Register Map for Cards of the Vibration Monitoring System IRD8800. This register map applied to all cards i.e M88200, M88210, M88250 and M88280