Data Sheet of SKU - IRD5420-10-RMS - Loop Powered Vibration Sensor with 4-20mA output proportional to 0-10 mm/s RMS
Introduction
IRD5420 is a 2-Wire Loop Powered Vibration Sensor that provides 4-20mA output proportional to a Set Full Scale of Vibration. The Full Scale can be user choice - with popular options being 0-25 mm/s RMS, 0-20 mm/s RMS, 0-50 mm/s RMS and 0-10 mm/s RMS. This Data Sheet covers details on 0-10 mm/s RMS variant which bears the SKU IRD5420-10-RMS
Specifications
Technical Performance
S No | Aspect | Value |
1 | Mounted Base Resonance | 3 kHz |
2 | Velocity Range | 0-10 mm/s RMS +/- 10% Nominal at 80 Hz and Ambient 22 Deg C |
3 | Frequency Response | 10 Hz (600 CPM) - 1 kHz (60k CPM) +/- 10% - ISO 20816 |
4 | Transverse Sensitivity | Less than 5% |
Electrical
| S No | Aspect | Value |
| 1 | Current Output | 4-20mA output proportional to 0-10 mm/s RMS |
| 2 | Supply Voltage | Ideal Voltage - 24 V DC; Tolerance - 15-30 V DC |
| 3 | Settling Time | 5 seconds |
| 4 | Output Impedance | Loop Resistance 600 Ohms at 24 V |
5 | Isolation | Connect Shield to Earth |
Mechanical
| S No | Aspect | Value |
| 1 | Case Material | Stainless Steel SS304 (SS316L available on request) |
| 2 | Sensing Element/Construction | PZT/Compression |
| 3 | Mounting Torque | 8 Nm |
| 4 | Weight | 185 grams (Nominal) |
5 | Connector | 4 Pin MIL Male Connector |
6 | Mounting Thread | 1/4"-28 UNF Female |
Environmental
S No | Aspect | Value |
1 | Operating Temperature Range | -5 to +90 Deg C |
2 | Sealing | IP68 |
3 | Maximum Shock | 30g pk |
Type Tests
Environmental
| S No | Aspect | Value |
| 1 | Cold Test | IEC 60068-2-1 |
| 2 | Dry Heat Test | IEC 60068-2-2 |
3 | Damp Heat Test | IEC 60068-2-30 |
4 | Shock Test | IEC 60068-2-27 |
5 | IP Rating | IEC 60529 |
6 | Corrosion Resistance | Salt Spray Test as per ISO 9227:2017 |
EMI EMC
| S No | Aspect | Value |
| 1 | Radiated Susceptibility Test | IEC 61000-4-3 |
| 2 | Electrostatic Discharge Test | IEC 61000-4-2 |
| 3 | Surge Test | IEC 61000-4-5 |
How to Order
Order online on www.irdmech.com OR contact sales@irdmech.com for a Quote
Related Articles
Data Sheet of SKU - IRD5420-20-RMS - Loop Powered Vibration Sensor with 4-20mA output proportional to 0-20 mm/s RMS
Introduction IRD5420 is a 2-Wire Loop Powered Vibration Sensor that provides 4-20mA output proportional to a Set Full Scale of Vibration. The Full Scale can be user choice - with popular options being 0-25 mm/s RMS, 0-20 mm/s RMS, 0-50 mm/s RMS and ...How to connect a Loop Powered Vibration Sensor
Loop Powered Sensors run on a DC Voltage Supply. They are a 2 wired system on which both supply is given and output is observed. Typically, loop powered sensors such as IRD591 are loop powered by DCS/PLC/SCADA by a 24 V DC supply. The sensor then ...Can we connect external display to Loop Powered Vibration Sensor IRD591 or IRD5420?
IRD591 as well as IRD5420 are Loop Powered Vibration Sensors that provide 4-20 mA output proportional to a fixed full scale range of Vibration. Many a times - IRD591 or IRD5420 are preferred over Wall mounted transmitters like IRD7100 or Rack mounted ...How to check Calibration of IRD544 and IRD544M
IRD544 and IRD544M are Inductive Type Velocity Output Vibration Sensors. They are used in both our Portable Instruments and Online Monitoring Systems. They provide a voltage output proportional to vibration velocity and the output which is also ...How to Adjust 4 mA in IRD7100 reading Vibration in mm/sec RMS when Vibration is Zero (0)
IRD7100 is an Online Monitoring System. It is designed to continuously monitor vibration of a Machine and transmit its vibration to the Control Room. One popular way of transmitting the vibration information is by using 4-20 mA Output. Here, 4 mA ...